Aerco ProtoNode Gateway Rev 3 (with external LEDs) Bedienungsanleitung PDF herunterladen (Seite 10)

AERCO ProtoNode Gateway

User Manual

Page 10 of 126 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0080_0H

11/06/2014 Ph.: 800-526-0288 GF-129

NOTE

If there are two instances of the same MAC address, it could

result in a network crash. The node offset will allow you to avoid

this situation.

2.4.2.1 Set Node_Offset to Assign Specific Device instances for BACnet

MS/TP and BACnet/IP

• If the Device Instances need to be set for addresses other than 1 to 255, change

the Node-Offset (See Figure 2-2)

• The BACnet Device Instance can range from 1 to 4,194,303.

• BACnet/IP and BACnet MS/TP Addressing: The BACnet device instances will

be set by taking the Node_Offset found in Web Configurator (see Figure 2-2)

and adding it to the value of the A Bank DIP switches. When more than one

device is connected to the ProtoNode, the subsequent BACnet device instances

will be sequential.

• Set the PC address to be on the same subnet as the ProtoNode. See section

5.3 on how to change the IP address. (See Figure 2-2)

• Open the PC browser to default IP address, which will bring you to the FST Web

Configurator for the ProtoNode.

• Change the Node offset to meet the required device instance.

For example:

o Node_Offset = 20000.

o A Bank DIP Switch = 11

o Device 1 Device Instance = 20011

NOTE

The A bank dip switch setting + node offset = device instance

setting.

FIGURE 2-2: MAC Address DIP Switches

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 125 126

Keine Kommentare

Aerco ProtoNode Gateway Rev 3 (with external LEDs) Bedienungsanleitung Seite 10